Phone: Mr. Deng, 13602391205
Phone: Miss Wei, 13826902521
Address: room 602, room 6, building 39, 602 Lai Lai Road, garden village, Dongcheng Street, Dongguan
When the general enterprise exports, in the loading process, the main worry is that the goods data errors, cargo damage and data and customs declaration data does not meet, resulting in customs will not release. Therefore, before shipment, the shipper, warehouse and freight forwarder must be coordinated and considerate to avoid the occurrence of such a situation.
1, different shapes, different packaging of goods as much as possible not to install together;
2, from the packaging will be seeping out of dust, liquid, moisture, odor and other goods, as far as possible not with other goods put together. In case of obstruction, use canvas, plastic sheeting, or other materials;
3. Light weight goods are placed on relatively heavy goods;
4. The goods of weak packing strength should be placed on the goods with strong packing strength;
5, liquid goods and cleaning goods should be placed under other goods as far as possible;
6, with sharp corners or protruding parts of the goods, need to be covered, in order to avoid damage to other goods.
Two, container loading skills
The packing container cargo operations usually have three kinds of methods: that all human cases, with a fork lift truck (forklift) into the box, and then stacked with all the machinery and human cases, such as pallets (pallet) cargo stowed in the box with a fork lift truck.
1, in any case, when the goods are loaded, the weight of the goods in the container shall not exceed the maximum load of the container, that is to say, the total quantity of the container minus the deadweight of the container. In general, the total weight and the weight are in the container door on the monogram.
Unit 2, unit weight of each container is certain, so in the case of loading the same goods, as long as you know the goods density, it can be concluded that is heavy or light. Cheng Qiwei said that if the unit density density is greater than the box is heavy goods, otherwise it is light. It is important to distinguish the two different cases in a timely and clear manner.
3, when loaded to the load balance on the bottom, in particular to strictly prohibited in the end of the center of gravity of the load deflection.
4 avoid concentrated load. "As in the heavy loading machinery equipment etc., the base should be covered with wood such as padding material, try to disperse the load. The average load per unit area of a standard container floor is approximately 20 feet container 1330x9.8N/m, and 40 foot container 980x9.8N/m2.
5, the use of human loading, we should pay attention to whether the package "no upside down", "flat", "vertical" and other loading and unloading signs. Make sure the correct use of loading tools, packing goods to prohibit the use of hook. The goods in the container should be loaded neatly and tightly packed. It is easy to bundle and pack fragile goods. Use a cushion or insert plywood between the goods to prevent the goods from moving in the box.
6, when loading the goods on board, we must master the internal size of the container and the external dimensions of the package, in order to calculate the number of packages, in order to minimize the number of abandoned and loaded goods.
7, fork loading and unloading truck when loading, will be affected by the free lifting height of the machine and the height of the door frame. Therefore, under the conditions permitted, the forklift can be loaded two layers at a time, but there must be a gap between the top and bottom. If conditions
Do not allow a loading of two words, in the second layer, taking into account the forktruck free lifting height and a fork lift door frame may be lifting height, then the door height should be set up the first layer of goods minus free lift
Height. In that case, the second - tier cargo can only be loaded on the third - tier cargo floor.
In addition, a fork lift truck with an ordinary lifting capacity of 2 tons is used, and its free lifting height is about 1250px. But there is also a free lifting height fork loader, this machine, as long as the box height allows, is not affected by the lifting height of the door, and can easily pile up two layers of goods. In addition, it should also be noted that the goods should be covered with cushion wood, so that the fork can be drawn out smoothly.
Finally, it is better not to bare the goods, at least to have the packaging, do not blindly save space and cause damage to the goods. The general goods also can have the packing, only for example big machine, such as boiler, building material and so on, will be more troublesome, must bind, tie tightly, in order to prevent loose. In fact, as long as careful and careful, it will not be too big problem.